Nook PowerTrax™ HG Shafting, shaft rails and shaft blocks are manufactured and stocked for immediate shipment from our Cleveland, Ohio facility.

• Precision Hardened and Ground HRC 60 Linear Shafting
• Alloy and Stainless Steel
• 1/4" to 4" Diameters

• Precision Hardened and Ground HRC 60 Linear Shafting
• Alloy
• 5 mm to 80 mm Diameters

• Precut and Packaged Stock Length Shafting
• High Carbon Alloy Steel - HRC 60, Stainless Steel - 440C
  or Chrome Plated
• 1/4" to 1-1/2" Diameters
• 6" to 72" Standard Lengths

• Precision Hardened and Ground HRC 60 Linear Shafting
• Stainless Steel - 440C
• 1/8" to 1/4" Diameters

• 40% lower profile for compact system. The low shaft support rails provide continuous or intermittent support when using open-type linear ball bearing pillow blocks.
• Un-Drilled and Pre-drilled Available
• Aluminum Alloy Extrusion
• 1/2" to 2" Diameters

• Continuous or intermittent support where loads require long shafts and high rigidity when using open-type linear ball bearing pillow blocks.
• Un-Drilled and Pre-drilled Available
• Aluminum Alloy Extrusion
• 1/2" to 2" Diameters

• Complete assembly with Precision Ground HRC 60 shaft mounted to Standard Continuous Rail
• Continuous or intermittent support where loads require long shafts and high rigidity when using open-type linear ball bearing pillow blocks. (pillow block not included)
• Aluminum Alloy Extrusion
• 1/2" to 2" Diameters

• Aluminum End Support Blocks for end or intermittent support in applications where loads are light and shaft deflection is minimal.
• Slit in the top surface of the support helps shaft insertion, set screw tights shaft in place.
• 1/4" to 2" Diameters

Back To Top